Multimedia Speakers 2.1

SPA7380/12

Multimedia Speakers 2.1

SPA7380/12

Immersive bass

Four sophisticated integrated circuits drive the subwoofer and two satellite speakers for quality sound while Philips SPD bass port technology delivers pure deep bass, and all with 60W output for the explosive bass that gamers want. See all benefits

Unfortunately this product is no longer available

MRP: Rs.7,990.00

Multimedia Speakers 2.1

Immersive bass

Four sophisticated integrated circuits drive the subwoofer and two satellite speakers for quality sound while Philips SPD bass port technology delivers pure deep bass, and all with 60W output for the explosive bass that gamers want. See all benefits

Immersive bass

Takes gaming to a new level

  • SPDTM bass port
  • 3" Satellite driver
  • 5.25" Subwoofer
  • 130W
60W output power

60W output power

60W output – wow! We gamers all want higher power because for gaming speakers the bigger the output, the better the bass and overall sound quality. So enjoy your next game with this powerful, big 60W output which gives you all the explosive bass you want.

Advanced integrated circuits

Advanced integrated circuits

The Philips integrated circuits in this speaker are very sophisticated. Normal speakers have between one to a maximum of 3 channels but this speaker comes with 4 channels to give you the better sound quality you need. Philips uses 4 integrated amplifier chips to drive the 2 channels of two satellite speakers and 2 channels the subwoofer. These TDA7379 amplifier chips provide a good solid foundation for quality sound and all the power needed to drive the subwoofer and satellites.

SPD™ innovative bass port technology for deep, rounded tones

SPD™ innovative bass port technology for deep, rounded tones

Philips Sound Purification Duct (SPD) bass port technology delivers the deep, pure tones of the original bass sound. Using an SPD foam material to process the inner surface of the bass pipe, the special acoustic damping invented by Philips reduces noise turbulence and stabilizes the tuning frequency. Philips technical and consumer tests confirm this buffer provides less colored, purer quality bass.

PP subwoofer driver material

PP subwoofer driver material

The polypropylene (PP) material in the driver, which is heavy, makes for better bass. It can help rolling out and produces a more bass with better clarity and balance. Easier to integrate with the full range driver and results in less vibration.

AUX-in and headphone out on wired control

AUX-in and headphone out on wired control

Now you can enjoy your favorite music and entertainment even easier and more conveniently, via the aux-in and headphone out jack on wired control. Usually, if you want to connect another device other than your PC you have to unplug the 3.5mm jack from the computer and that is not always expedient. But with the aux-in and headphone out connections on front you can quickly and easily listen to music straight from almost any device.

Long tube design generates more bass

All gamers want their speakers to have as much bass as possible, and these speakers are specially designed to deliver the bass you want. The long tube design of this satellite speaker gives better quality sound with extended bass. This creates more volume to generate more bass and bring you more enjoyment from your games.

Side firing bass port speaker design

The specially designed side firing bass port on these gaming speakers delivers more spacious sound with richer bass. Perfect for those really exciting gaming sessions!

Curvilinear cabinet for well-rounded sound

The curvilinear design of the cabinet not only looks good but is shaped to provide a balanced sound that emanates more naturally and in its original form. With less distortion and coloration, you can be assured that your favorite music will always sound the way it is supposed to. Philips knows acoustics and we make sure that sound not only sounds great, but looks great too!

Well damped driver reduces vibration and sound distortion

A single speaker driver normally incurs a specific frequency division vibration near the edge of the diaphragm, often resulting in some sound distortion. This way to overcome this problem by using Mylar, a uniform monomer and a much lighter material that is more usually used, around the driver cone. Surrounding the cone in a perfectly symmetrical ring, the resulting damping effect suppresses the asynchronous vibration, resulting in a more balanced and natural sound.

Technical Specifications

  • Connectivity

    Cable length
    Power cord, audio cable, satellite cable : 1.3M
    Connector
    3.5mm stereo
  • Outer Carton

    Length
    43.8  cm
    Number of consumer packagings
    2
    Width
    21.9  cm
    Gross weight
    11.2  kg
    Height
    57.4  cm
    GTIN
    1 87 12581 64432 8
    Nett weight
    8.15  kg
    Tare weight
    3.05  kg
  • Convenience

    Remote control
    volume control, headphone output, additional audio input, power indicator
  • Power

    Power LED indicator
    Green
  • Packaging dimensions

    Height
    27.9  cm
    Packaging type
    Carton
    Type of shelf placement
    Laying
    Width
    42.6  cm
    Depth
    30.7  cm
    Number of products included
    1
    EAN
    87 12581 64432 1
    Gross weight
    5.125  kg
    Nett weight
    4.075  kg
    Tare weight
    1.05  kg
  • Product dimensions

    Height
    22.5  cm
    Width
    22.5  cm
    Depth
    22.8  cm
    Weight
    3.19  kg
  • Packaging content

    Subwoofer
    Yes
    Number of satellites
    2
    3.5 mm stereo line cable
    Yes
    Quick installation guide
    Yes
    Remote Control
    Wired
  • Audio system

    Frequency range
    20Hz-20kHz
    Output power in total
    60W
    Input impedance
    20Kohm
    Signal/Noise ratio
    >75dB
    Power
    220V 50Hz
    THD
    <1%
  • Audio systems L/R channels

    Audio power amplifier
    Class-AB Amplifier
    Channel separation
    >45dB
    Rated output power
    14W x2
    Input sensitivity
    600mV
  • Left/Right speakers

    Driver power range
    1-30Wx2
    Speaker driver
    3"
    Frequency range
    80Hz-18kHz
    Norminal impedance
    4ohm
    Sensitivity
    86dB(2.83V/1m)
  • Subwoofer audio systems

    audio power amplifier
    Class-AB Amplifier (BTL)
    Input sensitivity
    130mV
    Rated outputer power
    32W
  • Subwoofer speaker

    Driver power range
    2-120W
    Frequency range
    45Hz-200Hz
    Norminal impedance
    4ohm
    Sensitivity
    88dB(2.83V/1m)
    Speaker driver
    5.25"

Suggested products

Recently viewed products

Reviews

Register

Subscribe to our newsletter

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.