Multimedia Speakers 2.0
SPA1260/12
Dynamic sound
With their powerful 3W RMS stereo output and ultra-chic, high-gloss finish, Philips SPA1260/12 speakers look every bit as classy as they sound!
See all benefitsUnfortunately this product is no longer available
This product qualifies for VAT relief
If you're eligible for VAT relief on medical devices, you can claim it on this product. The VAT amount will be deducted from the price shown above. Look for full details in your shopping basket.
Multimedia Speakers 2.0
Similar products
See all Speakers & headsets
3W RMS total output power
This system has 3W RMS total output power. RMS refers to Root Mean Square which is a typical measurement of audio power, or rather, the electrical power transferred from an audio amplifier to a loudspeaker, which is measured in watts. The amount of electrical power delivered to the loudspeaker and its sensitivity determines the sound power that is generated. The higher the wattage, the better the sound power emitted by the speaker.
Convenient aux-in and headphone out on front of speaker
Now you can enjoy your favorite music and entertainment even easier and more conveniently, via the aux-in and headphone out jack on the front of these speakers. Usually, if you want to connect another device other than your PC you have to unplug the 3.5mm jack from the computer and that is not always expedient. But with the aux-in and headphone out connections on front you can quickly and easily listen to music straight from almost any device.
Bass Reflex Speakers deliver deep and powerful bass
A chamber behind the speaker driver that channels air to acoustically tuned vents built into the speaker give the bass notes a more punchy, realistic sound.
Attractive high gloss finish
High-gloss 'Piano black' finish looks simply superb in both classic and modern interiors.
Well damped driver reduces vibration and sound distortion
A single speaker driver normally incurs a specific frequency division vibration near the edge of the diaphragm, often resulting in some sound distortion. This way to overcome this problem by using Mylar, a uniform monomer and a much lighter material that is more usually used, around the driver cone. Surrounding the cone in a perfectly symmetrical ring, the resulting damping effect suppresses the asynchronous vibration, resulting in a more balanced and natural sound.
Technical Specifications
-
Connectivity
- Cable length
- 1.5 m
- Connector
- 3.5 mm stereo
-
Outer Carton
- Length
- 27 cm
- Number of consumer packagings
- 4
- Width
- 26,2 cm
- Gross weight
- 5,9 kg
- Height
- 35,4 cm
- GTIN
- 1 87 12581 63982 9
- Nett weight
- 4,4 kg
- Tare weight
- 1,5 kg
-
Packaging dimensions
- Height
- 17,2 cm
- Packaging type
- Dummy
- Type of shelf placement
- Dummy
- Width
- 25,4 cm
- Depth
- 13 cm
- Number of products included
- 1
- EAN
- 87 12581 63982 2
- Gross weight
- 1,4 kg
- Nett weight
- 1,1 kg
- Tare weight
- 0,3 kg
-
Product dimensions
- Height
- 10,5 cm
- Width
- 14,5 cm
- Depth
- 18 cm
- Weight
- 0,95 kg
-
Packaging content
- Number of satellites
- 2
- Quick installation guide
- Yes
-
Audio system
- Frequency range
- 20Hz-20kHz
- Output power in total
- 3W
- Input impedance
- 10ohm
- Signal/Noise ratio
- >75dB
- Power
- 220V 50Hz
- THD
- <1%
-
Audio systems L/R channels
- Audio power amplifier
- Class-AB Amplifier
- Channel separation
- >45dB
- Rated output power
- 1.5W X 2
- Input sensitivity
- 600mV
-
Left/Right speakers
- Driver power range
- 1-5Wx2
- Speaker driver
- 2.5"
- Frequency range
- 75Hz-20kHz
- Norminal impedance
- 4ohm
- Sensitivity
- 85dB(2.83V/1m)
