Multimedia Speakers 2.1

SPDTM bass port, 3" Satellite driver, 5.25" Subwoofer, 130W SPA7380/12


My Philips speaker does not work when connected to a PC

In case the Plug and Play function of your Philips speaker does not work on your PC, please follow these simple steps described below to be able to enjoy the music:

General information

There is no need for driver installation for this speaker. The speaker is a “Plug and Play” device. In some rare cases the speaker may not be recognized by the computer. Follow the steps below for setup:

If you are using PC/Windows operating system

  1. Click Start
  2. Go to Control Panel > Sounds and Audio Devices
  3. Inside Sounds and Audio Devices Properties, select the Audio tab
  4. Under Sound playback, select Philips SPAXXXX
  5. Click Apply
  6. Start playback in the computer. The speaker should work fine now.
Sounds and Audio Device properties in your PC

1. Open System Preferences

System preferences on your MAC

2. Inside Hardware, click the Sound icon

Sound icon on your MAC

3. Open Output and select Philips SPAXXXX

Sound Output selection on your MAC

4. Start playback in the computer

The speaker should work fine now.

If the above does not help, contact Philips Customer Care for assistance.

The information on this page applies to the following models: SPA7380/12 , SPA6200/97 , SPA4210/97 , SPA5210/10 , SPA5210/97 , SPA5210B/97 . more less

Not what you are looking for?