How do Movement/Sound Detection of my Philips Indoor 360 Camera work
The Philips Indoor 360 camera works with motion and sound detection: when movement or sound is detected, this is recorded as an event and a notification can be sent. To find out more, read our article below.
There are 2 types of Movement detection:
All Movement: Any form of movement detected by the camera is recorded as an event and labelled the same, no matter the nature of this movement.
AI Detection: the built-in AI determines the type of motion detected and only records an event for the specific detection types that you have selected. (For example, with AI person detection, it will only record an event if the AI has labelled the movement as a person).
And 2 types of Sound detection:
All Sound: Any sound detected by the camera is recorded as an event and labelled the same, regardless of the type of sound.
Child Cry: the built-in AI determines the type of sound detected and only records an event if it has detected a child crying.
You can select your preferred type of movement and sound detection per device, by editing Modes. It is also possible to further configure what happens when movement is detected. See the section below to learn how to do this. The Indoor 360 camera can also be used for continuous recording. With this feature, the Indoor 360 camera will record for as long as the Mode, for which continuous recording is enabled, is active. Movement and Sound detection can be enabled during continuous recording to receive notifications of any activity.
You can configure Movement and sound detection to your liking for each Indoor Camera for each Mode.
Open "Modes" in the app.
Tap on ‘’edit’’ for the Mode you want to configure.
Select a camera.
Tap on ‘’Movement detection’’ or ‘’Sound detection’’.
Another screen will open where you can change all settings to your liking.
Tap the arrow in the top left to go back.
Save your changes.
You can set which actions are performed when movement or sound is detected. This works both for All Movement/All Sound and AI Detection/Child Cry.
Open "Modes" in the app.
Tap on ‘’edit’’ for the Mode you want to configure.
Select a camera.
Tap on ‘’Movement or Sound detection’’; a different screen will open.
Tap below Actions.
Toggle the actions on or off to your liking.
Tap twice the arrow in the top left to go back.
Save your changes.
The information on this page applies to the following models:HSP5500/02.