Automated external defibrillators

HeartStart FR3

Automated external defibrillator

Product number:

861388

The HeartStart FR3 is Philips best professional-grade AED with advanced features for the professional responder. The HeartStart FR3 reduces deployment time by eliminating steps and helps you start the right therapy on your patient faster.

Contact information

* This field is mandatory
*

Contact details

*
*
*

Company details

*
*
*
*
*

Business details

By specifying your reason for contact we will be able to provide you with a better service.
*
*
Features
Built to endure and designed for flex... || KBA1

Built to endure and designed for flexibility

The FR3 is built for harsh environments. It is tested to stringent military standards, meets IP55 rating for protection against dust and jetting water, and passes a 1,100 pound crush test. Its rechargeable battery option provides up to 100 shocks and 3 hours (with QCPR) of monitoring time. Plus, FR3 is a highly flexible platform so you can configure it for a wide range of current and evolving protocols.

Specifications

Defibrillation
Defibrillation
Waveform
  • Truncated Exponential Biphasic.Waveform parameters adjusted as a function of patient impedance.
Output Energy
  • Manual (selected): 1-10/15/20/30/50/70/100/120/150/170/200 Joules into a 50 Ohm load
  • AED Mode (single energy output): 150 Joules into a 50 ohm load. Joules/Ohm
Charge Time
  • Less than 5 seconds to 200 Joules with a new/ fully charged lithium ion battery at 25º C
Shock Delivery
  • Via multifunction defib electrode pads or paddles
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds seconds
Minimum Patient Impedance Range
  • 15 Ohm (internal defibrillation); 25 Ohm (external defibrillation) Ohm
Maximum Patient Impedance Range
  • 180 Ohm Ohm
AED Mode
  • Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines
Physical Dimensions
Physical Dimensions
Size with external paddles
  • 12.4" (W) x 7.7" (D) x 13.4" (H) (313 mm x 195 mm x 340 mm) "/mm
Weight
  • 13.2 lbs. (6 kg): base unit with 1 battery/pads and pads cable.
  • 13 lbs. (5.9 kg) with optional 75 mm strip chart printer.
  • Paddle tray and external standard paddles add less than 2.5 lbs. (1.1 kg).
  • Carrying case adds 4.1 lbs. (1.86 kg). lbs/kg
Physical dimensions Defibrillator model HeartStart MRx (M3536A)
Physical dimensions Defibrillator model HeartStart MRx (M3536A)
Size without external paddles
  • 12.4" (W) x 7.7" (D) x 11.7" (H) (313 mm x 195 mm x 295 mm) "/mm
CPR feedback and measurement
CPR feedback and measurement
Compression Depth
  • Target: -1.50 to -2.00" (-38 to -51 mm) "/mm
Compression Rate
  • Target: 90 to 120 cpm cpm
Ventilation Volume
  • Graphic indicator: empty/one-third full/two-thirds full/full
Ventilation Rate(a)
  • Target for breaths delivered before 60 seconds since last compression: 6 to 16 vpm seconds/vpm
Ventilation Rate(b)
  • Target for breaths delivered beyond 60 seconds since last compression: 9 to 16 vpm seconds/vpm
SpO2 pulse oximetry
SpO2 pulse oximetry
Range
  • 0 to 100% %
Resolution
  • 0,01%
Alarm Range(a)
  • Low Limit: 50 to 99% (Adult/Pediatric) %
Alarm Range(b)
  • High Limit: 51 to 100% (Adult/Pediatric) %
Alarm Delay
  • 10 seconds
Noninvasive Blood Pressure
Noninvasive Blood Pressure
Pressure Range(a)
  • Systolic: 40 to 260 mmHg mmHg
Pressure Range(b)
  • Diastolic: 20 to 200 mmHg mmHg
Initial Pressure
  • Adult: 160 mmHg and Pediatric: 120 mmHg mmHg
Maximum Pressure
  • 280 mmHg mmHg
Alarm Range(d)
  • Systolic high limit: 30 - 270 (Adult) and 35 - 180 (Pediatric)
Alarm Range(e)
  • Systolic low limit: 30 - 265 (Adult) and 30 - 175 (Pediatric)
Alarm Range(f)
  • Diastolic high limit: 18 - 240 (Adult) and 18 - 150 (Pediatric)
Alarm Range(g)
  • Diastolic low limit: 10 - 240 (Adult) and 10 - 145 (Pediatric)
ECG and arrhythmia monitoring
ECG and arrhythmia monitoring
Input
  • Up to 4 ECG waves displayed and up to 3 ECG waves print simultaneously.
Leads
  • Lead I, II, or III obtained through 3-lead ECG cable and separate monitoring electrodes.
  • With 5-lead cable, obtain leads I/II/III/aVR/aVL/ aVF or V.
  • Pads ECG obtained through 2 multifunction defibrillation electrode pads.
Lead Fault
  • ‘Lead Off ’ message and dashed line displayed if an electrode or lead wire becomes disconnected.
Pads Fault
  • Dashed line displayed if a pad becomes disconnected.
Heart Rate Display
  • Digital readout on display 15 to 300 bpm with accuracy ±10% bpm/%
Heart Rate/Arrhythmia Alarms
  • HR/Asystole/VFIB/VTACH/VTACH/extreme tachycardia/extreme bradycardia/PVC rate.
ECG Size
  • 2.5/5/10/20/40 mm/mV autogain mm/mV
Physical
Physical
Size
  • 2.7" high x 5.3" wide x 8.7" deep (6.9 cm x 13.5 cm x 22.1 cm)
Weight
  • 3 lbs 8 oz (1.6 kg) with FR3 standard battery installed
Environmental & physical requirements
Environmental & physical requirements
Solids/Water resistance
  • IP24
Operating temperature
  • 0º - 45º C (32º - 113º F) ° C/° F
Storage temperature
  • -20 - 70º C (-4º - 158º F) ° C/° F
Operating humidity
  • 0% to 95% relative %
Operating altitude
  • 0 to 15000 ft (0 to 4500 m) ft/m
Storage altitude
  • 0 to 15000 ft (0 to 4500 m) ft/m
Mechanical shock
  • Bump: IEC 68-2-29
  • Freefall: IEC 68-2-32
Operating vibration
  • MIL STD 810E 514.4 Category 6 Helicopter
General storage vibration
  • UH60 Non-Operating: IEC 68-2-6 Swept Sine Vibration and IEC 68-2-64 Random Vibration
Safety
  • Meets EN 60601-1, UL 2601-1/CSA C22.2 No. 601-1
Strip Chart Recorder
Strip Chart Recorder
Recorder(a)
  • Standard: 50 mm (paper width) thermal array printer mm
Recorder(b)
  • Optional: 75 mm (paper width) thermal array printer mm
Continuous ECG Strip
  • Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay
Auto Printing
  • Recorder can be configured to print marked events/charge/ shock and alarms
Reports
  • Event Summary, 12-Lead/Operational Check/ Configuration/Status Log and Device Information
Paper Size
  • 1.97” (50 mm) W by 100 ft. (30 m) L and 2.95” (75 mm) W by 100 ft. (30 m) L "/ft/mm/m
Environmental
Environmental
Sealing
  • Meets IEC529 class IP55 with battery installed
Temperature
  • Operating/standby: 32°–122°F (0°– 50°C)
Altitude
  • 0 –15,000 feet (0 –4,572 meters)
Battery
Battery
Type
  • 6.3 Ah, 14.8 V, rechargeable lithium ion Ah/V
Dimensions
  • 6.5" (H) x 3.8" (W) x 1.6" (D) (165 mm x 95 mm x 42 mm) "/mm
Weight
  • 1.6 lb. (0.73 kg) lb/kg
Charge Time
  • Approximately 3 hours from fully depleted to 100%. 90 minutes from fully depleted to 80% hours/%
Capacity(a)
  • At least 5 hours of continuous 12-lead ECG/SpO2 and CO2 monitoring.
  • With NBP every 15 minutes on one new fully charged battery. hours
Capacity(b)
  • At least 3.5 hours of continuous 12-lead ECG/SpO2 and CO2 monitoring.
  • With NBP every 15 minutes and pacing at 180 ppm at 160 mA on one new fully charged battery. hours
12-Lead ECG
12-Lead ECG
Input
  • 12-Lead cable: leads I/II/III/aVR/aVL/ aVF and V/C1-V/C6
Display View
  • All 12-lead ECG waves display simultaneously
Strip Recorder
  • All 12-leads print on the strip chart printer in 3x4 format
Transmission
  • CompactFlash data card; Bluetooth® dial-up Internet connection, Bluetooth® FTP
Display
Display
Dimensions
  • 8.4" diagonal (128 mm x 171 mm) "/mm
Type
  • TFT color LCD
Resolution
  • 480 x 640 pixels (VGA) VGA
Wave Viewing Time
  • 5 seconds (ECG) seconds
End-tidal CO2
End-tidal CO2
Range
  • 0 to 99 mmHg mmHg
Resolution
  • 1 mmHg (0.1 kPa) mmHg/kPa
Sample Size
  • 50 ml per minute ml
Alarm Range(h)
  • Low Limit: 10 to 95 mmHg (Adult/Pediatric) mmHg
Alarm Range(i)
  • High Limit: 20 to 100 mmHg (Adult/Pediatric) mmHg
Data storage
Data storage
Internal
  • 12 hours of continuous ECG waveforms and events. Plus 50 12-lead ECG reports
Data Card
  • 12 hours of continuous ECG waveforms and events.
  • Plus 50 12-lead ECG reports on a CompactFlash memory card
ECG display
ECG display
Screen
  • LCD color display, 320 x 240 pixels. 2.8" x 2.1" (7.2 cm x 5.4 cm)
Bandwidth
  • 1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
Monitored Lead
  • Lead II using anterior-anterior adult pads placement
Environment/physical
Environment/physical
Sealing
  • Meets IEC529 class IP55 with battery installed
Shock/drop
  • Meets MIL-STD-810F 516.4, Procedure IV
Temperature
  • Operating/standby: 32°–122°F (0°– 50°C)
Patient Impedance Range
  • Minimum: 15 ohm (internal defibrillation); 25 ohm (external defibrillation) Maximum: 180 ohm
Altitude
  • 0 –15,000 feet (0 –4,572 meters)
Vibration
  • Meets MIL-STD-810F 514.5 C-17
Abuse tolerance
  • After a ibe-meter drop to any edge, corner, or surface in standby mode
AED Mode
  • Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines
Environmental
Environmental
Shock/drop
  • Meets MIL-STD-810F 516.4, Procedure IV
Patient Impedance Range
  • "Minimum: 15 ohm (internal defibrillation); 25 ohm (external defibrillation) Maximum: 180 ohm"
Vibration
  • Meets MIL-STD-810F 514.5 C-17
Abuse tolerance
  • After a ibe-meter drop to any edge, corner, or surface in standby mode
AED Mode
  • Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines