Healthier Air, Always
The 2000 Series has with 3 smart pre-settings to choose from Pollution, Allergen and Bacteria & Virus modes. It removes up to 99.9% of viruses and aerosols from the air*. Activate auto mode to ensure your family breath clean air always
Healthier Air, Always
3 smart ways to optimize your purification
Removes aerosols including those containing respiratory virus, from the air which passes through the filter. It also sanitizes the air by removing 99.9% of aerosols from the air that may contain viruses.*
When in Silent Mode, the Purifier turns down its fan speed and noise level to allow a comfortable night's sleep.
Both AQI and the light on the UI can be dimmed and/or turned off avoid light disturbance for consumers.
Indoor PM2.5 levels can increase far above local guidelines because of activities like cooking. Pollution Mode can accurately detect invisible indoor air pollutants in real time, and then boosts the Air Purifier's speed to reduce harmful particles, gases, for a cleaner air output.
The filter lifetime is accurately calculated based on indoor pollution level, air flow and operation time. The healthy air protect alert lets you know promptly when it is time to replace the filter. If the filter is not replaced promptly, the appliance stops functioning -to avoid ineffective purification. So you are assured of healthier air always.
Vitashield IPS with its aerodynamic design and NanoProtect Filter has a boosted clean air delivery rate up to 344 m3/hr* (according to China GB/T 18801-2015). It can effectively remove ultra-fine particles as small as 0.003 micron , effectively reduce harmful gases such as formaldehyde, TVOC and odor. Removes up to 99.9% bacteria.
Bacteria & Virus particles are the ones seldom detected by air sensors. Hence the most effective way to reduce these particles is to significantly boost the airflow and increase the air exchange per hour. This mode boosts the Air flow, then the high quality HEPA filter in the Purifier effectively captures the bacteria and virus by 99.9%, ensuring cleaner air output.
Country of origin
China
Technical specifications
1.6 m
11~60 W
220 V
22-38 m²
50/60 Hz
20.5-52 dB(A)
Country of origin
China
Technical specifications
1.6 m
11~60 W
220 V
22-38 m²
50/60 Hz
20.5-52 dB(A)
Weight and dimensions
359 x 240 x 558 mm
412 294 x 612 mm
7.7 kg
9.3 kg
Design and finishing
White
Black
Aerasense PM2.5 sensor
Plastic
Silent, Speed 1, 2, 3, Turbo
Replacement
FY2426
Sustainability
<0.5 W
Performance
324 m³/h
115 m³/h
in one hour, >99 %
in 0.5 hr, 99.9 %