IMR sets a new direction in CT image quality with industry-leading low-contrast resolution and virtually noise*-free images. Philips IMR also offers fast reconstruction speed to support the most demanding studies.
Industry-leading low-contrast resolut... || Low dose, low contrast, low no
Industry-leading low-contrast resolution
IMR provides significant improvements in low contrast detectability, giving you confidence through enhanced visualization of fine detail and improved accuracy in detecting small, subtle structures. This outstanding improvement helps strengthen the position of CT as the backbone of radiology.
Knowledge-based iterative reconstruct... || Low dose, low contrast, low no
Lower dose with higher image quality
You can achieve 60 - 80% lower dose, and at the same time, improve low-contrast detectability by 43 - 80% and lower image noise by 70 - 83%, relative to standard (FBP) reconstruction.*
Virtually noise-free images || Low dose, low contrast, low no
Virtually noise-free images
Noise and artifacts limit visualization of critical structural information. IMR breaks the strong linkage between noise and dose, allowing for virtually noise-free** images through 73% to 90% noise reduction, helping reveal information previously hidden in noise.
First knowledge-based IR for Cardiac ... || Low dose, low contrast, low no
First knowledge-based IR for Cardiac CTA
IMR Platinum is the first knowledge-based solution to overcome the motion sensitivity associated with traditional model-based solutions. This allows it to be used in highly advanced acquisitions, such as cardiac CTA.
* In clinical practice, the use of IMR may reduce CT patient dose depending on the clinical task, patient size, anatomical location, and clinical practice. A consultation with a radiologist and a physicist should be made to determine the appropriate dose to obtain diagnostic image quality for the particular clinical task. Low-contrast detectability and noise were assessed using Reference Body Protocol comparing IMR to FBP; measured on 0.8 mm slices, tested on the MITA CT IQ Phantom (CCT183, The Phantom Laboratory), using human observers.
** Image noise as defined by IEC standard 61223-3-5. Image noise was assessed using reference body protocol, on a phantom. Data on file.